Default Password for 100Fio Networks Station M5 Router

To get access to 100Fio Networks Station M5 router, you need the login IP address of your router, the username, and password.

You can find these data in 100Fio Networks Station M5 router manual. But if you lost it, then you can use the quick guide below.

Login to the 100Fio Networks Station M5 Router

The 100Fio Networks Station M5 has a web interface for configuration. You can use any web browser to log in to the 100Fio Networks Station M5 router.

Put the IP Address(without “http://” or “https://”) of your 100Fio Networks Station M5 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your 100Fio Networks Station M5 login data.

Default login data for 100Fio Networks Station M5

You need to know the username and password to log in to your 100Fio Networks Station M5 router. We listed below.

Model Ip Username & Password
100Fio Networks Station M5 192.168.0.1 Username:root/ Password:default

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other 100Fio Networks Station M5 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of 100Fio Networks Station M5 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to 100Fio Networks Station M5 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the 100Fio Networks Station M5 Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change 100Fio Networks Station M5 Default Wifi Name (SSID)

By default, some 100Fio Networks Station M5 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for 100Fio Networks Station M5

MAC filtering allows you to restrict access to your 100Fio Networks Station M5 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your 100Fio Networks Station M5 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for 100Fio Networks Station M5 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

one + eleven =