Default Password for A-Link RoadRunner-84AP Router

To get access to A-Link RoadRunner-84AP router, you need the login IP address of your router, the username, and password.

You can find these information in A-Link RoadRunner-84AP router manual. But if you lost it, then you can use the quick guide below.

Login to the A-Link RoadRunner-84AP Router

The A-Link RoadRunner-84AP has a web interface for configuration. You can use any web browser to log in to the A-Link RoadRunner-84AP router.

Put the Internal IP Address of your A-Link RoadRunner-84AP in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your A-Link RoadRunner-84AP login data.

Default login data for A-Link RoadRunner-84AP

You need to know the username and password to log in to your A-Link RoadRunner-84AP router. We listed below.

Model Ip Username & Password
A-Link RoadRunner-84AP 10.0.0.2 Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other A-Link RoadRunner-84AP Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of A-Link RoadRunner-84AP Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to A-Link RoadRunner-84AP router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the A-Link RoadRunner-84AP Router To Default Settings?

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change A-Link RoadRunner-84AP Default Wifi Name (SSID)

By default, some A-Link RoadRunner-84AP routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for A-Link RoadRunner-84AP

MAC filtering allows you to restrict access to your A-Link RoadRunner-84AP router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your A-Link RoadRunner-84AP router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 10.0.0.2 on the address.
  2. Enter the username and password for A-Link RoadRunner-84AP router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

seventeen + eleven =