Default Password for Actiontec V1000H Router

To get access to Actiontec V1000H router, you need the login IP address of your router, the username, and password.

You can find these data in Actiontec V1000H router manual. But if you lost it, then you can use the quick guide below.

Login to the Actiontec V1000H Router

The Actiontec V1000H has a web interface for configuration. You can use any web browser to log in to the Actiontec V1000H router.

Put the IP Address(without “http://” or “https://”) of your Actiontec V1000H in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Actiontec V1000H login username & password.

Default login data for Actiontec V1000H

You need to know the username and password to log in to your Actiontec V1000H router. We listed below.

Model Ip Username & Password
Actiontec V1000H Username:admin/ Password:telus

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Actiontec V1000H Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Actiontec V1000H Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Actiontec V1000H router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Actiontec V1000H Router To Default Settings?

If you still can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Actiontec V1000H Default Wifi Name (SSID)

By default, some Actiontec V1000H routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Actiontec V1000H

MAC filtering allows you to restrict access to your Actiontec V1000H router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Actiontec V1000H router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Actiontec V1000H router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

nineteen − 2 =