Default Password for Airlink 101 AR625W Router

To get access to Airlink 101 AR625W router, you need the login IP address of your router, the username, and password.

You can find these information in Airlink 101 AR625W router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Airlink 101 AR625W Router

The Airlink 101 AR625W has a web interface for configuration. You can use any web browser to log in to the Airlink 101 AR625W router.

Put the Internal IP Address of your Airlink 101 AR625W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Airlink 101 AR625W login data.

Default login data for Airlink 101 AR625W

You need to know the username and password to log in to your Airlink 101 AR625W router. We listed below.

Model Ip Username & Password
Airlink 101 AR625W Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Airlink 101 AR625W Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Airlink 101 AR625W Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Airlink 101 AR625W router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Airlink 101 AR625W Router To Default Settings?

If you still can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Airlink 101 AR625W Default Wifi Name (SSID)

By default, some Airlink 101 AR625W routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Airlink 101 AR625W

MAC filtering allows you to restrict access to your Airlink 101 AR625W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Airlink 101 AR625W router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Airlink 101 AR625W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

5 − 1 =