Default Password for Allied Data CopperJet 1616-2P Router

To get access to Allied Data CopperJet 1616-2P router, you need the login IP address of your router, the username, and password.

You can find these info in Allied Data CopperJet 1616-2P router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Allied Data CopperJet 1616-2P Router

The Allied Data CopperJet 1616-2P has a web interface for configuration. You can use any web browser to log in to the Allied Data CopperJet 1616-2P router.

Put the Login IP Address of your Allied Data CopperJet 1616-2P in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Allied Data CopperJet 1616-2P login data.

Default login data for Allied Data CopperJet 1616-2P

You need to know the username and password to log in to your Allied Data CopperJet 1616-2P router. We listed below.

Model Ip Username & Password
Allied Data CopperJet 1616-2P 172.19.3.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Allied Data CopperJet 1616-2P Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Allied Data CopperJet 1616-2P Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Allied Data CopperJet 1616-2P router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Allied Data CopperJet 1616-2P Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Allied Data CopperJet 1616-2P Default Wifi Name (SSID)

By default, some Allied Data CopperJet 1616-2P routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Allied Data CopperJet 1616-2P

MAC filtering allows you to restrict access to your Allied Data CopperJet 1616-2P router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Allied Data CopperJet 1616-2P router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 172.19.3.1 on the address.
  2. Enter the username and password for Allied Data CopperJet 1616-2P router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

twenty − 9 =