To get access to Allied Data CopperJet 816-2P router, you need the login IP address of your router, the username, and password.
You can find these information in Allied Data CopperJet 816-2P router manual. But if you lost it, then you can use the quick guide below.
Login to the Allied Data CopperJet 816-2P Router
The Allied Data CopperJet 816-2P has a web interface for configuration. You can use any web browser to log in to the Allied Data CopperJet 816-2P router.
Put the Login IP Address of your Allied Data CopperJet 816-2P in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Allied Data CopperJet 816-2P login username & password.
Default login data for Allied Data CopperJet 816-2P
You need to know the username and password to log in to your Allied Data CopperJet 816-2P router. We listed below.
|Model||Ip||Username & Password|
|Allied Data CopperJet 816-2P||172.19.3.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Allied Data CopperJet 816-2P Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Allied Data CopperJet 816-2P Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Allied Data CopperJet 816-2P router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Allied Data CopperJet 816-2P Router To Default Settings?
If you can not get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Allied Data CopperJet 816-2P Default Wifi Name (SSID)
By default, some Allied Data CopperJet 816-2P routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Allied Data CopperJet 816-2P
MAC filtering allows you to restrict access to your Allied Data CopperJet 816-2P router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Allied Data CopperJet 816-2P router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 172.19.3.1 on the address.
- Enter the username and password for Allied Data CopperJet 816-2P router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.