Default Password for Arris DG1670 Router

To get access to Arris DG1670 router, you need the login IP address of your router, the username, and password.

You can find these data in Arris DG1670 router manual. But if you lost it, then you can use the quick guide below.

Login to the Arris DG1670 Router

The Arris DG1670 has a web interface for configuration. You can use any web browser to log in to the Arris DG1670 router.

Put the Login IP Address of your Arris DG1670 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Arris DG1670 login data.

Default login data for Arris DG1670

You need to know the username and password to log in to your Arris DG1670 router. We listed below.

Model Ip Username & Password
Arris DG1670 Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Arris DG1670 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Arris DG1670 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Arris DG1670 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Arris DG1670 Router To Default Settings?

If you still can not get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Arris DG1670 Default Wifi Name (SSID)

By default, some Arris DG1670 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Arris DG1670

MAC filtering allows you to restrict access to your Arris DG1670 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Arris DG1670 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Arris DG1670 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

four × 5 =