Default Password for Arris NVG343BQ Windstream Router

To get access to Arris NVG343BQ Windstream router, you need the login IP address of your router, the username, and password.

You can find these info in Arris NVG343BQ Windstream router manual. But if you lost it, then you can use the quick guide below.

Login to the Arris NVG343BQ Windstream Router

The Arris NVG343BQ Windstream has a web interface for configuration. You can use any web browser to log in to the Arris NVG343BQ Windstream router.

Put the IP Address(without “http://” or “https://”) of your Arris NVG343BQ Windstream in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Arris NVG343BQ Windstream login username & password.

Default login data for Arris NVG343BQ Windstream

You need to know the username and password to log in to your Arris NVG343BQ Windstream router. We listed below.

Model Ip Username & Password
Arris NVG343BQ Windstream Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Arris NVG343BQ Windstream Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Arris NVG343BQ Windstream Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Arris NVG343BQ Windstream router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Arris NVG343BQ Windstream Router To Default Settings?

If you still can not access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Arris NVG343BQ Windstream Default Wifi Name (SSID)

By default, some Arris NVG343BQ Windstream routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Arris NVG343BQ Windstream

MAC filtering allows you to restrict access to your Arris NVG343BQ Windstream router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Arris NVG343BQ Windstream router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Arris NVG343BQ Windstream router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

five + 10 =