Default Password for Arris NVG468MQ Router

To get access to Arris NVG468MQ router, you need the login IP address of your router, the username, and password.

You can find these information in Arris NVG468MQ router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Arris NVG468MQ Router

The Arris NVG468MQ has a web interface for configuration. You can use any web browser to log in to the Arris NVG468MQ router.

Put the Login IP Address of your Arris NVG468MQ in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Arris NVG468MQ login username & password.

Default login data for Arris NVG468MQ

You need to know the username and password to log in to your Arris NVG468MQ router. We listed below.

Model Ip Username & Password
Arris NVG468MQ Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Arris NVG468MQ Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Arris NVG468MQ Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Arris NVG468MQ router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Arris NVG468MQ Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Arris NVG468MQ Default Wifi Name (SSID)

By default, some Arris NVG468MQ routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Arris NVG468MQ

MAC filtering allows you to restrict access to your Arris NVG468MQ router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Arris NVG468MQ router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Arris NVG468MQ router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

twelve + 16 =