Default Password for Arris TG3452A Router

To get access to Arris TG3452A router, you need the login IP address of your router, the username, and password.

You can find these information in Arris TG3452A router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Arris TG3452A Router

The Arris TG3452A has a web interface for configuration. You can use any web browser to log in to the Arris TG3452A router.

Put the Login IP Address of your Arris TG3452A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Arris TG3452A login infomation.

Default login data for Arris TG3452A

You need to know the username and password to log in to your Arris TG3452A router. We listed below.

Model Ip Username & Password
Arris TG3452A 192.168.0.1 Username:admin/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Arris TG3452A Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Arris TG3452A Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Arris TG3452A router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Arris TG3452A Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Arris TG3452A Default Wifi Name (SSID)

By default, some Arris TG3452A routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Arris TG3452A

MAC filtering allows you to restrict access to your Arris TG3452A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Arris TG3452A router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Arris TG3452A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

twenty − 7 =