Default Password for Asus DSL-AC52U Router

To get access to Asus DSL-AC52U router, you need the login IP address of your router, the username, and password.

You can find these data in Asus DSL-AC52U router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Asus DSL-AC52U Router

The Asus DSL-AC52U has a web interface for configuration. You can use any web browser to log in to the Asus DSL-AC52U router.

Put the Login IP Address of your Asus DSL-AC52U in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Asus DSL-AC52U login username & password.

Default login data for Asus DSL-AC52U

You need to know the username and password to log in to your Asus DSL-AC52U router. We listed below.

Model Ip Username & Password
Asus DSL-AC52U 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Asus DSL-AC52U Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Asus DSL-AC52U Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Asus DSL-AC52U router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Asus DSL-AC52U Router To Default Settings?

If you can’t access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Asus DSL-AC52U Default Wifi Name (SSID)

By default, some Asus DSL-AC52U routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Asus DSL-AC52U

MAC filtering allows you to restrict access to your Asus DSL-AC52U router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Asus DSL-AC52U router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Asus DSL-AC52U router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

four + 16 =