Default Password for Asus G-136 Router

To get access to Asus G-136 router, you need the login IP address of your router, the username, and password.

You can find these information in Asus G-136 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Asus G-136 Router

The Asus G-136 has a web interface for configuration. You can use any web browser to log in to the Asus G-136 router.

Put the Login IP Address of your Asus G-136 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Asus G-136 login data.

Default login data for Asus G-136

You need to know the username and password to log in to your Asus G-136 router. We listed below.

Model Ip Username & Password
Asus G-136 192.168.1.1 Username:admin/ Password:epicrouter

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Asus G-136 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Asus G-136 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Asus G-136 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Asus G-136 Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Asus G-136 Default Wifi Name (SSID)

By default, some Asus G-136 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Asus G-136

MAC filtering allows you to restrict access to your Asus G-136 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Asus G-136 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Asus G-136 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

twelve − 3 =