Default Password for Asus WL550gE Router

To get access to Asus WL550gE router, you need the login IP address of your router, the username, and password.

You can find these info in Asus WL550gE router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Asus WL550gE Router

The Asus WL550gE has a web interface for configuration. You can use any web browser to log in to the Asus WL550gE router.

Put the IP Address(without “http://” or “https://”) of your Asus WL550gE in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Asus WL550gE login data.

Default login data for Asus WL550gE

You need to know the username and password to log in to your Asus WL550gE router. We listed below.

Model Ip Username & Password
Asus WL550gE 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Asus WL550gE Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Asus WL550gE Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Asus WL550gE router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Asus WL550gE Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Asus WL550gE Default Wifi Name (SSID)

By default, some Asus WL550gE routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Asus WL550gE

MAC filtering allows you to restrict access to your Asus WL550gE router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Asus WL550gE router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Asus WL550gE router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

11 − six =