Default Password for Aztech DSL305EU Router

To get access to Aztech DSL305EU router, you need the login IP address of your router, the username, and password.

You can find these data in Aztech DSL305EU router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Aztech DSL305EU Router

The Aztech DSL305EU has a web interface for configuration. You can use any web browser to log in to the Aztech DSL305EU router.

Put the Login IP Address of your Aztech DSL305EU in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Aztech DSL305EU login data.

Default login data for Aztech DSL305EU

You need to know the username and password to log in to your Aztech DSL305EU router. We listed below.

Model Ip Username & Password
Aztech DSL305EU 192.168.1.1 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Aztech DSL305EU Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Aztech DSL305EU Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Aztech DSL305EU router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Aztech DSL305EU Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Aztech DSL305EU Default Wifi Name (SSID)

By default, some Aztech DSL305EU routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Aztech DSL305EU

MAC filtering allows you to restrict access to your Aztech DSL305EU router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Aztech DSL305EU router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Aztech DSL305EU router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

12 + 16 =