To get access to Aztech DSL3100R router, you need the login IP address of your router, the username, and password.
You can find these information in Aztech DSL3100R router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Aztech DSL3100R Router
The Aztech DSL3100R has a web interface for configuration. You can use any web browser to log in to the Aztech DSL3100R router.
Put the IP Address(without “http://” or “https://”) of your Aztech DSL3100R in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Aztech DSL3100R login username & password.
Default login data for Aztech DSL3100R
You need to know the username and password to log in to your Aztech DSL3100R router. We listed below.
|Model||Ip||Username & Password|
|Aztech DSL3100R||10.0.0.2||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Aztech DSL3100R Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Aztech DSL3100R Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Aztech DSL3100R router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Aztech DSL3100R Router To Default Settings?
If you still can not login the setup page of router, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change Aztech DSL3100R Default Wifi Name (SSID)
By default, some Aztech DSL3100R routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Aztech DSL3100R
MAC filtering allows you to restrict access to your Aztech DSL3100R router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Aztech DSL3100R router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 10.0.0.2 on the address.
- Enter the username and password for Aztech DSL3100R router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.