Default Password for Aztech DSL5018EN-1T1R Router

To get access to Aztech DSL5018EN-1T1R router, you need the login IP address of your router, the username, and password.

You can find these info in Aztech DSL5018EN-1T1R router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Aztech DSL5018EN-1T1R Router

The Aztech DSL5018EN-1T1R has a web interface for configuration. You can use any web browser to log in to the Aztech DSL5018EN-1T1R router.

Put the IP Address(without “http://” or “https://”) of your Aztech DSL5018EN-1T1R in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Aztech DSL5018EN-1T1R login infomation.

Default login data for Aztech DSL5018EN-1T1R

You need to know the username and password to log in to your Aztech DSL5018EN-1T1R router. We listed below.

Model Ip Username & Password
Aztech DSL5018EN-1T1R 192.168.254.254 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Aztech DSL5018EN-1T1R Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Aztech DSL5018EN-1T1R Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Aztech DSL5018EN-1T1R router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Aztech DSL5018EN-1T1R Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Aztech DSL5018EN-1T1R Default Wifi Name (SSID)

By default, some Aztech DSL5018EN-1T1R routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Aztech DSL5018EN-1T1R

MAC filtering allows you to restrict access to your Aztech DSL5018EN-1T1R router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Aztech DSL5018EN-1T1R router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.254.254 on the address.
  2. Enter the username and password for Aztech DSL5018EN-1T1R router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

1 × 4 =