To get access to Aztech DSL600ER router, you need the login IP address of your router, the username, and password.
You can find these info in Aztech DSL600ER router manual. But if you lost it, then you can use the quick guide below.
Login to the Aztech DSL600ER Router
The Aztech DSL600ER has a web interface for configuration. You can use any web browser to log in to the Aztech DSL600ER router.
Put the IP Address(without “http://” or “https://”) of your Aztech DSL600ER in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Aztech DSL600ER login infomation.
Default login data for Aztech DSL600ER
You need to know the username and password to log in to your Aztech DSL600ER router. We listed below.
|Model||Ip||Username & Password|
|Aztech DSL600ER||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Aztech DSL600ER Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of Aztech DSL600ER Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Aztech DSL600ER router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Aztech DSL600ER Router To Default Settings?
If you still can’t login the setup page of router, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change Aztech DSL600ER Default Wifi Name (SSID)
By default, some Aztech DSL600ER routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Aztech DSL600ER
MAC filtering allows you to restrict access to your Aztech DSL600ER router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Aztech DSL600ER router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Aztech DSL600ER router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.