Default Password for Aztech DSL7000GRV Router

To get access to Aztech DSL7000GRV router, you need the login IP address of your router, the username, and password.

You can find these data in Aztech DSL7000GRV router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Aztech DSL7000GRV Router

The Aztech DSL7000GRV has a web interface for configuration. You can use any web browser to log in to the Aztech DSL7000GRV router.

Put the IP Address(without “http://” or “https://”) of your Aztech DSL7000GRV in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Aztech DSL7000GRV login infomation.

Default login data for Aztech DSL7000GRV

You need to know the username and password to log in to your Aztech DSL7000GRV router. We listed below.

Model Ip Username & Password
Aztech DSL7000GRV 192.168.1.254 Username:(none)/ Password:Aztechadmin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Aztech DSL7000GRV Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Aztech DSL7000GRV Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Aztech DSL7000GRV router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Aztech DSL7000GRV Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Aztech DSL7000GRV Default Wifi Name (SSID)

By default, some Aztech DSL7000GRV routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Aztech DSL7000GRV

MAC filtering allows you to restrict access to your Aztech DSL7000GRV router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Aztech DSL7000GRV router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Aztech DSL7000GRV router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

17 + 12 =