To get access to BEC Technologies 7402GTMR4-SCED router, you need the login IP address of your router, the username, and password.
You can find these info in BEC Technologies 7402GTMR4-SCED router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the BEC Technologies 7402GTMR4-SCED Router
The BEC Technologies 7402GTMR4-SCED has a web interface for configuration. You can use any web browser to log in to the BEC Technologies 7402GTMR4-SCED router.
Put the Login IP Address of your BEC Technologies 7402GTMR4-SCED in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your BEC Technologies 7402GTMR4-SCED login username & password.
Default login data for BEC Technologies 7402GTMR4-SCED
You need to know the username and password to log in to your BEC Technologies 7402GTMR4-SCED router. We listed below.
|Model||Ip||Username & Password|
|BEC Technologies 7402GTMR4-SCED||192.168.1.254||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other BEC Technologies 7402GTMR4-SCED Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of BEC Technologies 7402GTMR4-SCED Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to BEC Technologies 7402GTMR4-SCED router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the BEC Technologies 7402GTMR4-SCED Router To Default Settings?
If you can not get logged in, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change BEC Technologies 7402GTMR4-SCED Default Wifi Name (SSID)
By default, some BEC Technologies 7402GTMR4-SCED routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for BEC Technologies 7402GTMR4-SCED
MAC filtering allows you to restrict access to your BEC Technologies 7402GTMR4-SCED router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your BEC Technologies 7402GTMR4-SCED router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.254 on the address.
- Enter the username and password for BEC Technologies 7402GTMR4-SCED router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.