To get access to BEC Technologies BEC 8800N router, you need the login IP address of your router, the username, and password.
You can find these information in BEC Technologies BEC 8800N router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the BEC Technologies BEC 8800N Router
The BEC Technologies BEC 8800N has a web interface for configuration. You can use any web browser to log in to the BEC Technologies BEC 8800N router.
Put the Login IP Address of your BEC Technologies BEC 8800N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your BEC Technologies BEC 8800N login data.
Default login data for BEC Technologies BEC 8800N
You need to know the username and password to log in to your BEC Technologies BEC 8800N router. We listed below.
|Model||Ip||Username & Password|
|BEC Technologies BEC 8800N||192.168.1.254||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other BEC Technologies BEC 8800N Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of BEC Technologies BEC 8800N Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to BEC Technologies BEC 8800N router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the BEC Technologies BEC 8800N Router To Default Settings?
If you still can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change BEC Technologies BEC 8800N Default Wifi Name (SSID)
By default, some BEC Technologies BEC 8800N routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for BEC Technologies BEC 8800N
MAC filtering allows you to restrict access to your BEC Technologies BEC 8800N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your BEC Technologies BEC 8800N router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.254 on the address.
- Enter the username and password for BEC Technologies BEC 8800N router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.