To get access to BEC Technologies BEC 8920NE router, you need the login IP address of your router, the username, and password.
You can find these information in BEC Technologies BEC 8920NE router manual. But if you lost it, then you can use the quick guide below.
Login to the BEC Technologies BEC 8920NE Router
The BEC Technologies BEC 8920NE has a web interface for configuration. You can use any web browser to log in to the BEC Technologies BEC 8920NE router.
Put the IP Address(without “http://” or “https://”) of your BEC Technologies BEC 8920NE in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your BEC Technologies BEC 8920NE login infomation.
Default login data for BEC Technologies BEC 8920NE
You need to know the username and password to log in to your BEC Technologies BEC 8920NE router. We listed below.
|Model||Ip||Username & Password|
|BEC Technologies BEC 8920NE||192.168.1.254||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other BEC Technologies BEC 8920NE Login Problems
If you not be able to get a login to your router, here are a few possible solutions you can try.
The Password of BEC Technologies BEC 8920NE Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to BEC Technologies BEC 8920NE router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the BEC Technologies BEC 8920NE Router To Default Settings?
If you still can’t get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change BEC Technologies BEC 8920NE Default Wifi Name (SSID)
By default, some BEC Technologies BEC 8920NE routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for BEC Technologies BEC 8920NE
MAC filtering allows you to restrict access to your BEC Technologies BEC 8920NE router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your BEC Technologies BEC 8920NE router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.254 on the address.
- Enter the username and password for BEC Technologies BEC 8920NE router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.