Default Password for Belkin F1PI242ENau Router

To get access to Belkin F1PI242ENau router, you need the login IP address of your router, the username, and password.

You can find these info in Belkin F1PI242ENau router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Belkin F1PI242ENau Router

The Belkin F1PI242ENau has a web interface for configuration. You can use any web browser to log in to the Belkin F1PI242ENau router.

Put the Internal IP Address of your Belkin F1PI242ENau in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Belkin F1PI242ENau login username & password.

Default login data for Belkin F1PI242ENau

You need to know the username and password to log in to your Belkin F1PI242ENau router. We listed below.

Model Ip Username & Password
Belkin F1PI242ENau Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Belkin F1PI242ENau Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Belkin F1PI242ENau Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Belkin F1PI242ENau router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Belkin F1PI242ENau Router To Default Settings?

If you still can not get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Belkin F1PI242ENau Default Wifi Name (SSID)

By default, some Belkin F1PI242ENau routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Belkin F1PI242ENau

MAC filtering allows you to restrict access to your Belkin F1PI242ENau router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Belkin F1PI242ENau router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Belkin F1PI242ENau router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

19 − 10 =