Default Password for Belkin F5D6231-4 Router

To get access to Belkin F5D6231-4 router, you need the login IP address of your router, the username, and password.

You can find these info in Belkin F5D6231-4 router manual. But if you lost it, then you can use the quick guide below.

Login to the Belkin F5D6231-4 Router

The Belkin F5D6231-4 has a web interface for configuration. You can use any web browser to log in to the Belkin F5D6231-4 router.

Put the Internal IP Address of your Belkin F5D6231-4 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Belkin F5D6231-4 login username & password.

Default login data for Belkin F5D6231-4

You need to know the username and password to log in to your Belkin F5D6231-4 router. We listed below.

Model Ip Username & Password
Belkin F5D6231-4 192.168.2.1 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Belkin F5D6231-4 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Belkin F5D6231-4 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Belkin F5D6231-4 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Belkin F5D6231-4 Router To Default Settings?

If you still can not access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Belkin F5D6231-4 Default Wifi Name (SSID)

By default, some Belkin F5D6231-4 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Belkin F5D6231-4

MAC filtering allows you to restrict access to your Belkin F5D6231-4 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Belkin F5D6231-4 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.2.1 on the address.
  2. Enter the username and password for Belkin F5D6231-4 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

one + nineteen =