Default Password for Belkin F5D8236-4 Router

To get access to Belkin F5D8236-4 router, you need the login IP address of your router, the username, and password.

You can find these data in Belkin F5D8236-4 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Belkin F5D8236-4 Router

The Belkin F5D8236-4 has a web interface for configuration. You can use any web browser to log in to the Belkin F5D8236-4 router.

Put the Internal IP Address of your Belkin F5D8236-4 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Belkin F5D8236-4 login username & password.

Default login data for Belkin F5D8236-4

You need to know the username and password to log in to your Belkin F5D8236-4 router. We listed below.

Model Ip Username & Password
Belkin F5D8236-4 192.168.2.1 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Belkin F5D8236-4 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Belkin F5D8236-4 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Belkin F5D8236-4 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Belkin F5D8236-4 Router To Default Settings?

If you still can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Belkin F5D8236-4 Default Wifi Name (SSID)

By default, some Belkin F5D8236-4 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Belkin F5D8236-4

MAC filtering allows you to restrict access to your Belkin F5D8236-4 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Belkin F5D8236-4 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.2.1 on the address.
  2. Enter the username and password for Belkin F5D8236-4 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

five × five =