To get access to Belkin ME1004-R router, you need the login IP address of your router, the username, and password.
You can find these data in Belkin ME1004-R router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Belkin ME1004-R Router
The Belkin ME1004-R has a web interface for configuration. You can use any web browser to log in to the Belkin ME1004-R router.
Put the Login IP Address of your Belkin ME1004-R in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Belkin ME1004-R login username & password.
Default login data for Belkin ME1004-R
You need to know the username and password to log in to your Belkin ME1004-R router. We listed below.
|Model||Ip||Username & Password|
|Belkin ME1004-R||192.168.2.1||Username:(none)/ Password:(none)|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Belkin ME1004-R Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Belkin ME1004-R Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Belkin ME1004-R router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Belkin ME1004-R Router To Default Settings?
If you still can’t login the setup page of router, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change Belkin ME1004-R Default Wifi Name (SSID)
By default, some Belkin ME1004-R routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Belkin ME1004-R
MAC filtering allows you to restrict access to your Belkin ME1004-R router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Belkin ME1004-R router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.2.1 on the address.
- Enter the username and password for Belkin ME1004-R router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.