Default Password for Billion Bipac 5102G Router

To get access to Billion Bipac 5102G router, you need the login IP address of your router, the username, and password.

You can find these information in Billion Bipac 5102G router manual. But if you lost it, then you can use the quick guide below.

Login to the Billion Bipac 5102G Router

The Billion Bipac 5102G has a web interface for configuration. You can use any web browser to log in to the Billion Bipac 5102G router.

Put the Login IP Address of your Billion Bipac 5102G in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Billion Bipac 5102G login infomation.

Default login data for Billion Bipac 5102G

You need to know the username and password to log in to your Billion Bipac 5102G router. We listed below.

Model Ip Username & Password
Billion Bipac 5102G Username:admim/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Billion Bipac 5102G Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Billion Bipac 5102G Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Billion Bipac 5102G router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Billion Bipac 5102G Router To Default Settings?

If you still can’t get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Billion Bipac 5102G Default Wifi Name (SSID)

By default, some Billion Bipac 5102G routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Billion Bipac 5102G

MAC filtering allows you to restrict access to your Billion Bipac 5102G router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Billion Bipac 5102G router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Billion Bipac 5102G router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

9 + 6 =