To get access to Billion BiPAC 7800DXL router, you need the login IP address of your router, the username, and password.
You can find these info in Billion BiPAC 7800DXL router manual. But if you lost it, then you can use the quick guide below.
Login to the Billion BiPAC 7800DXL Router
The Billion BiPAC 7800DXL has a web interface for configuration. You can use any web browser to log in to the Billion BiPAC 7800DXL router.
Put the Login IP Address of your Billion BiPAC 7800DXL in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Billion BiPAC 7800DXL login data.
Default login data for Billion BiPAC 7800DXL
You need to know the username and password to log in to your Billion BiPAC 7800DXL router. We listed below.
|Model||Ip||Username & Password|
|Billion BiPAC 7800DXL||192.168.1.254||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Billion BiPAC 7800DXL Login Problems
If you can’t get a login to your router, here are some possible solutions you can try.
The Password of Billion BiPAC 7800DXL Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Billion BiPAC 7800DXL router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Billion BiPAC 7800DXL Router To Default Settings?
If you still can’t login the setup page of router, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Billion BiPAC 7800DXL Default Wifi Name (SSID)
By default, some Billion BiPAC 7800DXL routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Billion BiPAC 7800DXL
MAC filtering allows you to restrict access to your Billion BiPAC 7800DXL router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Billion BiPAC 7800DXL router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.254 on the address.
- Enter the username and password for Billion BiPAC 7800DXL router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.