Default Password for Billion Bipac 7800N Router

To get access to Billion Bipac 7800N router, you need the login IP address of your router, the username, and password.

You can find these data in Billion Bipac 7800N router manual. But if you lost it, then you can use the quick guide below.

Login to the Billion Bipac 7800N Router

The Billion Bipac 7800N has a web interface for configuration. You can use any web browser to log in to the Billion Bipac 7800N router.

Put the Internal IP Address of your Billion Bipac 7800N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Billion Bipac 7800N login data.

Default login data for Billion Bipac 7800N

You need to know the username and password to log in to your Billion Bipac 7800N router. We listed below.

Model Ip Username & Password
Billion Bipac 7800N 192.168.1.254 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Billion Bipac 7800N Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Billion Bipac 7800N Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Billion Bipac 7800N router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Billion Bipac 7800N Router To Default Settings?

If you can’t get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Billion Bipac 7800N Default Wifi Name (SSID)

By default, some Billion Bipac 7800N routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Billion Bipac 7800N

MAC filtering allows you to restrict access to your Billion Bipac 7800N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Billion Bipac 7800N router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Billion Bipac 7800N router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

seven − 3 =