Default Password for Binatone ADSL 2000 Router

To get access to Binatone ADSL 2000 router, you need the login IP address of your router, the username, and password.

You can find these data in Binatone ADSL 2000 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Binatone ADSL 2000 Router

The Binatone ADSL 2000 has a web interface for configuration. You can use any web browser to log in to the Binatone ADSL 2000 router.

Put the Internal IP Address of your Binatone ADSL 2000 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Binatone ADSL 2000 login username & password.

Default login data for Binatone ADSL 2000

You need to know the username and password to log in to your Binatone ADSL 2000 router. We listed below.

Model Ip Username & Password
Binatone ADSL 2000 Username:Admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Binatone ADSL 2000 Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Binatone ADSL 2000 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Binatone ADSL 2000 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Binatone ADSL 2000 Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Binatone ADSL 2000 Default Wifi Name (SSID)

By default, some Binatone ADSL 2000 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Binatone ADSL 2000

MAC filtering allows you to restrict access to your Binatone ADSL 2000 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Binatone ADSL 2000 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Binatone ADSL 2000 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

six + 18 =