Default Password for Calix 836GE Router

To get access to Calix 836GE router, you need the login IP address of your router, the username, and password.

You can find these information in Calix 836GE router manual. But if you lost it, then you can use the quick guide below.

Login to the Calix 836GE Router

The Calix 836GE has a web interface for configuration. You can use any web browser to log in to the Calix 836GE router.

Put the Internal IP Address of your Calix 836GE in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Calix 836GE login data.

Default login data for Calix 836GE

You need to know the username and password to log in to your Calix 836GE router. We listed below.

Model Ip Username & Password
Calix 836GE 192.168.1.1 Username:support/ Password:support

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Calix 836GE Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Calix 836GE Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Calix 836GE router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Calix 836GE Router To Default Settings?

If you still can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Calix 836GE Default Wifi Name (SSID)

By default, some Calix 836GE routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Calix 836GE

MAC filtering allows you to restrict access to your Calix 836GE router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Calix 836GE router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Calix 836GE router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

one × 4 =