Default Password for Calix GS2020E Router

To get access to Calix GS2020E router, you need the login IP address of your router, the username, and password.

You can find these data in Calix GS2020E router manual. But if you lost it, then you can use the quick guide below.

Login to the Calix GS2020E Router

The Calix GS2020E has a web interface for configuration. You can use any web browser to log in to the Calix GS2020E router.

Put the IP Address(without “http://” or “https://”) of your Calix GS2020E in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Calix GS2020E login data.

Default login data for Calix GS2020E

You need to know the username and password to log in to your Calix GS2020E router. We listed below.

Model Ip Username & Password
Calix GS2020E 192.168.1.1 Username:admin/ Password:created during setup

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Calix GS2020E Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Calix GS2020E Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Calix GS2020E router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Calix GS2020E Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Calix GS2020E Default Wifi Name (SSID)

By default, some Calix GS2020E routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Calix GS2020E

MAC filtering allows you to restrict access to your Calix GS2020E router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Calix GS2020E router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Calix GS2020E router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

4 − three =