Default Password for Compal CH7465LG-VM Router

To get access to Compal CH7465LG-VM router, you need the login IP address of your router, the username, and password.

You can find these data in Compal CH7465LG-VM router manual. But if you lost it, then you can use the quick guide below.

Login to the Compal CH7465LG-VM Router

The Compal CH7465LG-VM has a web interface for configuration. You can use any web browser to log in to the Compal CH7465LG-VM router.

Put the IP Address(without “http://” or “https://”) of your Compal CH7465LG-VM in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Compal CH7465LG-VM login infomation.

Default login data for Compal CH7465LG-VM

You need to know the username and password to log in to your Compal CH7465LG-VM router. We listed below.

Model Ip Username & Password
Compal CH7465LG-VM Username:(none)/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Compal CH7465LG-VM Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Compal CH7465LG-VM Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Compal CH7465LG-VM router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Compal CH7465LG-VM Router To Default Settings?

If you still can not get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Compal CH7465LG-VM Default Wifi Name (SSID)

By default, some Compal CH7465LG-VM routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Compal CH7465LG-VM

MAC filtering allows you to restrict access to your Compal CH7465LG-VM router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Compal CH7465LG-VM router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Compal CH7465LG-VM router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

4 − three =