Default Password for Comtrend CT-562+ Router

To get access to Comtrend CT-562+ router, you need the login IP address of your router, the username, and password.

You can find these data in Comtrend CT-562+ router manual. But if you lost it, then you can use the quick guide below.

Login to the Comtrend CT-562+ Router

The Comtrend CT-562+ has a web interface for configuration. You can use any web browser to log in to the Comtrend CT-562+ router.

Put the IP Address(without “http://” or “https://”) of your Comtrend CT-562+ in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Comtrend CT-562+ login data.

Default login data for Comtrend CT-562+

You need to know the username and password to log in to your Comtrend CT-562+ router. We listed below.

Model Ip Username & Password
Comtrend CT-562+ 192.168.0.1 Username:root/ Password:12345

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Comtrend CT-562+ Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Comtrend CT-562+ Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Comtrend CT-562+ router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Comtrend CT-562+ Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Comtrend CT-562+ Default Wifi Name (SSID)

By default, some Comtrend CT-562+ routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Comtrend CT-562+

MAC filtering allows you to restrict access to your Comtrend CT-562+ router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Comtrend CT-562+ router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Comtrend CT-562+ router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

5 × two =