Default Password for Comtrend VR-3031u Router

To get access to Comtrend VR-3031u router, you need the login IP address of your router, the username, and password.

You can find these info in Comtrend VR-3031u router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Comtrend VR-3031u Router

The Comtrend VR-3031u has a web interface for configuration. You can use any web browser to log in to the Comtrend VR-3031u router.

Put the Login IP Address of your Comtrend VR-3031u in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Comtrend VR-3031u login username & password.

Default login data for Comtrend VR-3031u

You need to know the username and password to log in to your Comtrend VR-3031u router. We listed below.

Model Ip Username & Password
Comtrend VR-3031u 192.168.1.1 Username:admin/ Password:create in initial setup

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Comtrend VR-3031u Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Comtrend VR-3031u Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Comtrend VR-3031u router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Comtrend VR-3031u Router To Default Settings?

If you can’t get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Comtrend VR-3031u Default Wifi Name (SSID)

By default, some Comtrend VR-3031u routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Comtrend VR-3031u

MAC filtering allows you to restrict access to your Comtrend VR-3031u router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Comtrend VR-3031u router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Comtrend VR-3031u router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

eleven + 16 =