Default Password for Digisol DG-BR4000NE Router

To get access to Digisol DG-BR4000NE router, you need the login IP address of your router, the username, and password.

You can find these information in Digisol DG-BR4000NE router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Digisol DG-BR4000NE Router

The Digisol DG-BR4000NE has a web interface for configuration. You can use any web browser to log in to the Digisol DG-BR4000NE router.

Put the Internal IP Address of your Digisol DG-BR4000NE in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Digisol DG-BR4000NE login infomation.

Default login data for Digisol DG-BR4000NE

You need to know the username and password to log in to your Digisol DG-BR4000NE router. We listed below.

Model Ip Username & Password
Digisol DG-BR4000NE Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Digisol DG-BR4000NE Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Digisol DG-BR4000NE Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Digisol DG-BR4000NE router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Digisol DG-BR4000NE Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Digisol DG-BR4000NE Default Wifi Name (SSID)

By default, some Digisol DG-BR4000NE routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Digisol DG-BR4000NE

MAC filtering allows you to restrict access to your Digisol DG-BR4000NE router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Digisol DG-BR4000NE router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Digisol DG-BR4000NE router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

19 − two =