Default Password for Dlink DFL-80 Firewall Router

To get access to Dlink DFL-80 Firewall router, you need the login IP address of your router, the username, and password.

You can find these information in Dlink DFL-80 Firewall router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Dlink DFL-80 Firewall Router

The Dlink DFL-80 Firewall has a web interface for configuration. You can use any web browser to log in to the Dlink DFL-80 Firewall router.

Put the Login IP Address of your Dlink DFL-80 Firewall in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DFL-80 Firewall login infomation.

Default login data for Dlink DFL-80 Firewall

You need to know the username and password to log in to your Dlink DFL-80 Firewall router. We listed below.

Model Ip Username & Password
Dlink DFL-80 Firewall 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DFL-80 Firewall Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Dlink DFL-80 Firewall Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Dlink DFL-80 Firewall router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Dlink DFL-80 Firewall Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DFL-80 Firewall Default Wifi Name (SSID)

By default, some Dlink DFL-80 Firewall routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DFL-80 Firewall

MAC filtering allows you to restrict access to your Dlink DFL-80 Firewall router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DFL-80 Firewall router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Dlink DFL-80 Firewall router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

5 × 1 =