To get access to Dlink DI-707 router, you need the login IP address of your router, the username, and password.
You can find these info in Dlink DI-707 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Dlink DI-707 Router
The Dlink DI-707 has a web interface for configuration. You can use any web browser to log in to the Dlink DI-707 router.
Put the Login IP Address of your Dlink DI-707 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DI-707 login data.
Default login data for Dlink DI-707
You need to know the username and password to log in to your Dlink DI-707 router. We listed below.
|Model||Ip||Username & Password|
|Dlink DI-707||192.168.0.1||Username:(none)/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Dlink DI-707 Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Dlink DI-707 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Dlink DI-707 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Dlink DI-707 Router To Default Settings?
If you still can’t access the router’s setup page, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Dlink DI-707 Default Wifi Name (SSID)
By default, some Dlink DI-707 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Dlink DI-707
MAC filtering allows you to restrict access to your Dlink DI-707 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DI-707 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for Dlink DI-707 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.