To get access to Dlink DNS-120 router, you need the login IP address of your router, the username, and password.
You can find these information in Dlink DNS-120 router manual. But if you lost it, then you can use the quick guide below.
Login to the Dlink DNS-120 Router
The Dlink DNS-120 has a web interface for configuration. You can use any web browser to log in to the Dlink DNS-120 router.
Put the Login IP Address of your Dlink DNS-120 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DNS-120 login infomation.
Default login data for Dlink DNS-120
You need to know the username and password to log in to your Dlink DNS-120 router. We listed below.
|Model||Ip||Username & Password|
|Dlink DNS-120||192.168.0.101||Username:admin/ Password:(none)|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Dlink DNS-120 Login Problems
If you not be able to get a login to your router, here are a few possible solutions you can try.
The Password of Dlink DNS-120 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Dlink DNS-120 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the Dlink DNS-120 Router To Default Settings?
If you can’t access the router’s setup page, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Dlink DNS-120 Default Wifi Name (SSID)
By default, some Dlink DNS-120 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Dlink DNS-120
MAC filtering allows you to restrict access to your Dlink DNS-120 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DNS-120 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.0.101 on the address.
- Enter the username and password for Dlink DNS-120 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.