Default Password for Dlink DP-300U Router

To get access to Dlink DP-300U router, you need the login IP address of your router, the username, and password.

You can find these data in Dlink DP-300U router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Dlink DP-300U Router

The Dlink DP-300U has a web interface for configuration. You can use any web browser to log in to the Dlink DP-300U router.

Put the Login IP Address of your Dlink DP-300U in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DP-300U login data.

Default login data for Dlink DP-300U

You need to know the username and password to log in to your Dlink DP-300U router. We listed below.

Model Ip Username & Password
Dlink DP-300U 192.168.0.10 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DP-300U Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Dlink DP-300U Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Dlink DP-300U router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Dlink DP-300U Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DP-300U Default Wifi Name (SSID)

By default, some Dlink DP-300U routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DP-300U

MAC filtering allows you to restrict access to your Dlink DP-300U router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DP-300U router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.10 on the address.
  2. Enter the username and password for Dlink DP-300U router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

3 × 2 =