Default Password for Dlink DP-311P Router

To get access to Dlink DP-311P router, you need the login IP address of your router, the username, and password.

You can find these information in Dlink DP-311P router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Dlink DP-311P Router

The Dlink DP-311P has a web interface for configuration. You can use any web browser to log in to the Dlink DP-311P router.

Put the IP Address(without “http://” or “https://”) of your Dlink DP-311P in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DP-311P login data.

Default login data for Dlink DP-311P

You need to know the username and password to log in to your Dlink DP-311P router. We listed below.

Model Ip Username & Password
Dlink DP-311P 192.168.0.10 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DP-311P Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Dlink DP-311P Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Dlink DP-311P router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Dlink DP-311P Router To Default Settings?

If you still can not get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DP-311P Default Wifi Name (SSID)

By default, some Dlink DP-311P routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DP-311P

MAC filtering allows you to restrict access to your Dlink DP-311P router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DP-311P router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.10 on the address.
  2. Enter the username and password for Dlink DP-311P router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

five × two =