Default Password for Dlink DPR-1260 Router

To get access to Dlink DPR-1260 router, you need the login IP address of your router, the username, and password.

You can find these data in Dlink DPR-1260 router manual. But if you lost it, then you can use the quick guide below.

Login to the Dlink DPR-1260 Router

The Dlink DPR-1260 has a web interface for configuration. You can use any web browser to log in to the Dlink DPR-1260 router.

Put the Login IP Address of your Dlink DPR-1260 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DPR-1260 login username & password.

Default login data for Dlink DPR-1260

You need to know the username and password to log in to your Dlink DPR-1260 router. We listed below.

Model Ip Username & Password
Dlink DPR-1260 Username:(none)/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DPR-1260 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Dlink DPR-1260 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Dlink DPR-1260 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Dlink DPR-1260 Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DPR-1260 Default Wifi Name (SSID)

By default, some Dlink DPR-1260 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DPR-1260

MAC filtering allows you to restrict access to your Dlink DPR-1260 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DPR-1260 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Dlink DPR-1260 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

1 × five =