Default Password for Dlink DSL-254OU Router

To get access to Dlink DSL-254OU router, you need the login IP address of your router, the username, and password.

You can find these info in Dlink DSL-254OU router manual. But if you lost it, then you can use the quick guide below.

Login to the Dlink DSL-254OU Router

The Dlink DSL-254OU has a web interface for configuration. You can use any web browser to log in to the Dlink DSL-254OU router.

Put the Internal IP Address of your Dlink DSL-254OU in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DSL-254OU login infomation.

Default login data for Dlink DSL-254OU

You need to know the username and password to log in to your Dlink DSL-254OU router. We listed below.

Model Ip Username & Password
Dlink DSL-254OU 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DSL-254OU Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Dlink DSL-254OU Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Dlink DSL-254OU router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Dlink DSL-254OU Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DSL-254OU Default Wifi Name (SSID)

By default, some Dlink DSL-254OU routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DSL-254OU

MAC filtering allows you to restrict access to your Dlink DSL-254OU router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DSL-254OU router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Dlink DSL-254OU router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

14 + 2 =