To get access to Dlink DSL-6740U router, you need the login IP address of your router, the username, and password.
You can find these data in Dlink DSL-6740U router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Dlink DSL-6740U Router
The Dlink DSL-6740U has a web interface for configuration. You can use any web browser to log in to the Dlink DSL-6740U router.
Put the IP Address(without “http://” or “https://”) of your Dlink DSL-6740U in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DSL-6740U login infomation.
Default login data for Dlink DSL-6740U
You need to know the username and password to log in to your Dlink DSL-6740U router. We listed below.
|Model||Ip||Username & Password|
|Dlink DSL-6740U||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Dlink DSL-6740U Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Dlink DSL-6740U Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Dlink DSL-6740U router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Dlink DSL-6740U Router To Default Settings?
If you still can’t get logged in, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Dlink DSL-6740U Default Wifi Name (SSID)
By default, some Dlink DSL-6740U routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Dlink DSL-6740U
MAC filtering allows you to restrict access to your Dlink DSL-6740U router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DSL-6740U router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Dlink DSL-6740U router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.