Default Password for Dlink DWL-3150 Router

To get access to Dlink DWL-3150 router, you need the login IP address of your router, the username, and password.

You can find these info in Dlink DWL-3150 router manual. But if you lost it, then you can use the quick guide below.

Login to the Dlink DWL-3150 Router

The Dlink DWL-3150 has a web interface for configuration. You can use any web browser to log in to the Dlink DWL-3150 router.

Put the IP Address(without “http://” or “https://”) of your Dlink DWL-3150 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Dlink DWL-3150 login username & password.

Default login data for Dlink DWL-3150

You need to know the username and password to log in to your Dlink DWL-3150 router. We listed below.

Model Ip Username & Password
Dlink DWL-3150 192.168.0.50 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Dlink DWL-3150 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Dlink DWL-3150 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Dlink DWL-3150 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Dlink DWL-3150 Router To Default Settings?

If you can’t get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Dlink DWL-3150 Default Wifi Name (SSID)

By default, some Dlink DWL-3150 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Dlink DWL-3150

MAC filtering allows you to restrict access to your Dlink DWL-3150 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Dlink DWL-3150 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.50 on the address.
  2. Enter the username and password for Dlink DWL-3150 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

eight + four =