Default Password for Draytek Vigor 2132F Router

To get access to Draytek Vigor 2132F router, you need the login IP address of your router, the username, and password.

You can find these information in Draytek Vigor 2132F router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Draytek Vigor 2132F Router

The Draytek Vigor 2132F has a web interface for configuration. You can use any web browser to log in to the Draytek Vigor 2132F router.

Put the Internal IP Address of your Draytek Vigor 2132F in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Draytek Vigor 2132F login infomation.

Default login data for Draytek Vigor 2132F

You need to know the username and password to log in to your Draytek Vigor 2132F router. We listed below.

Model Ip Username & Password
Draytek Vigor 2132F 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Draytek Vigor 2132F Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Draytek Vigor 2132F Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Draytek Vigor 2132F router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Draytek Vigor 2132F Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Draytek Vigor 2132F Default Wifi Name (SSID)

By default, some Draytek Vigor 2132F routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Draytek Vigor 2132F

MAC filtering allows you to restrict access to your Draytek Vigor 2132F router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Draytek Vigor 2132F router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Draytek Vigor 2132F router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

12 + fifteen =