Default Password for Edimax AR-6024 WGA Router

To get access to Edimax AR-6024 WGA router, you need the login IP address of your router, the username, and password.

You can find these information in Edimax AR-6024 WGA router manual. But if you lost it, then you can use the quick guide below.

Login to the Edimax AR-6024 WGA Router

The Edimax AR-6024 WGA has a web interface for configuration. You can use any web browser to log in to the Edimax AR-6024 WGA router.

Put the Internal IP Address of your Edimax AR-6024 WGA in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Edimax AR-6024 WGA login username & password.

Default login data for Edimax AR-6024 WGA

You need to know the username and password to log in to your Edimax AR-6024 WGA router. We listed below.

Model Ip Username & Password
Edimax AR-6024 WGA 192.168.1.1 Username:Admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Edimax AR-6024 WGA Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Edimax AR-6024 WGA Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Edimax AR-6024 WGA router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Edimax AR-6024 WGA Router To Default Settings?

If you can’t get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Edimax AR-6024 WGA Default Wifi Name (SSID)

By default, some Edimax AR-6024 WGA routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Edimax AR-6024 WGA

MAC filtering allows you to restrict access to your Edimax AR-6024 WGA router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Edimax AR-6024 WGA router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Edimax AR-6024 WGA router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

3 × one =