Default Password for EE Bright Box Router

To get access to EE Bright Box router, you need the login IP address of your router, the username, and password.

You can find these information in EE Bright Box router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the EE Bright Box Router

The EE Bright Box has a web interface for configuration. You can use any web browser to log in to the EE Bright Box router.

Put the IP Address(without “http://” or “https://”) of your EE Bright Box in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your EE Bright Box login data.

Default login data for EE Bright Box

You need to know the username and password to log in to your EE Bright Box router. We listed below.

Model Ip Username & Password
EE Bright Box Username:(none)/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other EE Bright Box Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of EE Bright Box Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to EE Bright Box router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the EE Bright Box Router To Default Settings?

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change EE Bright Box Default Wifi Name (SSID)

By default, some EE Bright Box routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for EE Bright Box

MAC filtering allows you to restrict access to your EE Bright Box router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your EE Bright Box router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for EE Bright Box router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

five × four =