To get access to Eminent EM4218 router, you need the login IP address of your router, the username, and password.
You can find these data in Eminent EM4218 router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Eminent EM4218 Router
The Eminent EM4218 has a web interface for configuration. You can use any web browser to log in to the Eminent EM4218 router.
Put the IP Address(without “http://” or “https://”) of your Eminent EM4218 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Eminent EM4218 login data.
Default login data for Eminent EM4218
You need to know the username and password to log in to your Eminent EM4218 router. We listed below.
|Model||Ip||Username & Password|
|Eminent EM4218||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Eminent EM4218 Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Eminent EM4218 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Eminent EM4218 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the Eminent EM4218 Router To Default Settings?
If you can not access the router’s setup page, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Eminent EM4218 Default Wifi Name (SSID)
By default, some Eminent EM4218 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Eminent EM4218
MAC filtering allows you to restrict access to your Eminent EM4218 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Eminent EM4218 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Eminent EM4218 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.