Default Password for Ericsson HM210DI Router

To get access to Ericsson HM210DI router, you need the login IP address of your router, the username, and password.

You can find these info in Ericsson HM210DI router manual. But if you lost it, then you can use the quick guide below.

Login to the Ericsson HM210DI Router

The Ericsson HM210DI has a web interface for configuration. You can use any web browser to log in to the Ericsson HM210DI router.

Put the Internal IP Address of your Ericsson HM210DI in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ericsson HM210DI login infomation.

Default login data for Ericsson HM210DI

You need to know the username and password to log in to your Ericsson HM210DI router. We listed below.

Model Ip Username & Password
Ericsson HM210DI 192.168.1.1 Username:root/ Password:root

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ericsson HM210DI Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Ericsson HM210DI Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ericsson HM210DI router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Ericsson HM210DI Router To Default Settings?

If you still can’t get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Ericsson HM210DI Default Wifi Name (SSID)

By default, some Ericsson HM210DI routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ericsson HM210DI

MAC filtering allows you to restrict access to your Ericsson HM210DI router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ericsson HM210DI router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Ericsson HM210DI router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

10 − ten =