Default Password for Ericsson HM210DP Router

To get access to Ericsson HM210DP router, you need the login IP address of your router, the username, and password.

You can find these data in Ericsson HM210DP router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Ericsson HM210DP Router

The Ericsson HM210DP has a web interface for configuration. You can use any web browser to log in to the Ericsson HM210DP router.

Put the Login IP Address of your Ericsson HM210DP in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ericsson HM210DP login username & password.

Default login data for Ericsson HM210DP

You need to know the username and password to log in to your Ericsson HM210DP router. We listed below.

Model Ip Username & Password
Ericsson HM210DP 192.168.1.1 Username:root/ Password:root

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ericsson HM210DP Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Ericsson HM210DP Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ericsson HM210DP router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Ericsson HM210DP Router To Default Settings?

If you still can’t get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Ericsson HM210DP Default Wifi Name (SSID)

By default, some Ericsson HM210DP routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ericsson HM210DP

MAC filtering allows you to restrict access to your Ericsson HM210DP router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ericsson HM210DP router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Ericsson HM210DP router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

2 + 19 =